Cylinder area
Cylinders should be upright, stable, ventilated, protected from damage and positioned in accordance with the applicable requirements.
Gas installation safety
Queensland LPG gas bottle safety.
Understand visible warning signs and the records that should be checked for domestic LPG cylinder and gas appliance installations.
Buyer overview
Cylinder condition is only one part of gas safety.
A safe LPG installation depends on cylinder location, stability, ventilation, clearances, regulators, pipework, appliance installation, flues and completed gas-work documentation. Requirements vary with the installation and the work date.
System components
Regulators, hoses, pipework, isolation valves, appliance connections and flues should be assessed by a licensed gas fitter.
Current records
Gas-system work should be supported by the certificate, notice or electronic record required for the work undertaken.
Inspection scope: A building inspection may record readily visible gas-related concerns. It does not leak-test, pressure-test, operate, service or certify gas systems, appliances or flues.
Practical checks
What buyers should observe and verify.
Visible warning signs
- Cylinders leaning, unsecured, damaged, heavily corroded or exposed to vehicle impact.
- Cylinders within an enclosed or poorly ventilated space.
- Deteriorated hoses, damaged regulators, unsupported pipework or improvised fittings.
- Gas odour, hissing, staining or heat damage near cylinders or appliances.
- Openings, ignition sources or combustible storage close to the cylinder area.
- Gas appliances or alterations without available gas-work records.
Recommended next steps
- If gas is smelt, avoid ignition sources, leave the area, isolate the supply only if safe and contact emergency or licensed assistance.
- Arrange a licensed gas fitter’s inspection and testing before using a questionable installation.
- Request current gas certificates and records for installation or alteration work.
- Confirm cylinder placement, clearances, regulator capacity, pipe sizing and appliance ventilation with the gas fitter.
- Do not relocate cylinders, alter piping or service appliances yourself.
Limits of a visual inspection
Visible observations do not establish gas safety or compliance.
Leaks and unsafe combustion may not be apparent. Testing and certification are outside the scope of a visual building inspection.
Not confirmed
- Gas tightness, pressure, flow or regulator performance.
- Compliance with legislation, AS/NZS 5601 or manufacturer instructions.
- Appliance safety, combustion, ventilation or flue performance.
- Condition of concealed gas pipework.
- Whether records exist for every prior gas-system alteration.
When specialist input is appropriate
- Appropriately licensed gas fitter for inspection, testing and certification.
- Licensed appliance service technician where applicable.
- LPG supplier for cylinder and supply arrangements.
- Resources Safety and Health Queensland for current regulatory information.
Never use a flame to test for a leak. Any suspected leak or unsafe appliance requires immediate action by an appropriately licensed person.
Official information
Authoritative sources and further reading.
Requirements can change and may depend on the building classification, approval date and work undertaken. Confirm current obligations with the relevant authority or appropriately licensed specialist.
Common questions
Frequently asked questions.
Does Premise Inspections test gas installations?
No. Gas testing, appliance operation and certification must be completed by an appropriately licensed gas fitter or service technician.
Is a gas compliance plate always required?
Requirements have changed and depend on the installation and work date. Request the applicable gas-work certificate or electronic record and confirm with the current regulator or gas fitter.
What should I do if I smell gas?
Avoid flames, switches and other ignition sources, leave the area, isolate the supply only if safe, and contact emergency or licensed assistance.
HouseWorthy packages
ONE PROPERTY
Best value
THREE PROPERTIES
Research the property before the physical inspection.
$29
Property Intelligence Report
Property, planning, environmental, utility and buyer due-diligence information with practical next checks.
View the $29 report$59
Buyer Shortlist
Three report credits to compare risks, advantages and next checks across different properties.
View the $59 shortlist
$50 Premise inspection offer: purchase an eligible HouseWorthy package, then book and complete a combined Premise building and timber pest inspection for the same property within 30 days. Supply the purchase email or Stripe receipt when booking. Conditions apply.
HouseWorthy is a property information service by Premise Inspections. It is not a building and timber pest inspection, valuation, engineering assessment, approval search, certification or guarantee.
Request an inspection quote
Provide the available property details and we will email an indicative quotation. Final pricing may vary with the property’s size, construction, age, condition, location and accessibility.
Premise Inspections
Independent building and timber pest inspections
Reports generally available within 24 hours
What happens next
- 1Receive your indicative quoteWe email the estimate using the property details supplied.
- 2Reply if you wish to proceedProvide the selling agent’s name and contact details.
- 3Confirm the bookingWe coordinate access and confirm the inspection arrangements.
Prefer to speak directly?
Call 1300 396 585
info@ppbi.com.au
Get the facts before you commit.
Request a clear written quote for your property inspection.